Coil Master DIY Kit

Product Introduction:

    Introducing the Coil Master , a revolutionary micro coiling technology, making coils now is a breeze! Simply trap your wire, rotate the top cap, and you get that perfect micro coil in seconds, each and every time. Light weight and portable, perfect for traveling,  simply Insert the socket screw into the appropriate hole of the winder section its that easy! You will receive one (1) main unit with four (4) extra top caps and five (5) different post sizes. One size fits all - simply change the metal post to your gauge of choice (1mm, 1.5mm, 2mm, 2.5mm, 3mm).

Features:

Constructed from high grade aluminum material
The Coil Master is easily the most revolutionary, ultra functionary auto-coiler that will create tight, uniform coils in just seconds. Build from 20 - 28 Gauge rounded kanthal wire or any low resistant wires like G-Plat, Royal or Hot wire with just twist of your finger!
Instead of having to purchase separate units for different size diameters, you can easily interchange the size of the coil with only one unit (saves you over $40+!!)

 

How to use:

1. Insert wire through hole on the side of the handle. Leave about 1/2" of the wire protruding from the hole. Hold the end of the wire against the handle so it won't pull through

2. Pull the loose end of the wire around the shaft

3. Slide the winder section over the shaft with the pin facing toward the handle

4. Turn the winder section so that it catches the wire and starts wrapping it around the shaft. Keep light pressure against handle while winding. Excessive pressure will force smaller gauge wire to wrap over itself

5. When finished, remove winder and straighten the wire end that protrudes from the hole in the handle

6. Push up on the wire to slide coil up. Carefully grab the coil at the bottom to slide it off the shaft